کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
299320 511829 2006 24 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Experimental and theoretical investigations on the COMET concept for ex-vessel core melt retention
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی مهندسی انرژی و فناوری های برق
پیش نمایش صفحه اول مقاله
Experimental and theoretical investigations on the COMET concept for ex-vessel core melt retention
چکیده انگلیسی

In the very unlikely case of a core melt accident in a nuclear power plant, the reactor pressure vessel could fail and corium melt could be released into the reactor cavity. Subsequent processes could result in a threat of the containment integrity. As a counter-measure the implementation of a core-catcher device in nuclear power plants is envisaged. Such a core-catcher concept has been developed at the Forschungszentrum Karlsruhe (FZK, Germany) within the COMET project. It is based on water injection into the melt layer from the bottom, yielding rapid fragmentation of the corium, porosity formation and thus coolability. Detailed large scale experiments with sustained heating of melts have highlighted the sequences of flooding and cooling and have been used to optimise the COMET concept. The open porosities and large surfaces that are generated during melt solidification form a porous permeable structure that is permanently filled with the evaporating coolant water and thus allows efficient short-term and long-term removal of the decay heat. Two variants of the bottom flooding concept have been developed and seem technically mature for reactor application. Corium layers up to 0.5 m high are safely arrested and cooled by water supply with 0.2 bar overpressure.The conceptual and experimental work at FZK is accompanied by theoretical investigations at IKE, University of Stuttgart. These investigations address porosity formation as well as quenching and long-term coolability of layers with resulting porosities. The aim of the theoretical work is to get a better understanding of the underlying processes of porosity formation in order to generally support the applicability of the concept for real conditions and to allow checks and optimisation for various conditions. A model for porosity formation is presented, which assumes that this process is essentially determined by strong local pressure buildup from strong evaporation due to water injection from below and the restriction of steam removal by friction in the melt. The effect of key parameters is investigated and compared to experimental results. Agreement about the influence and importance of these parameters as well as essential quantitative effects is found.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Nuclear Engineering and Design - Volume 236, Issues 19–21, October 2006, Pages 2304–2327
نویسندگان
, , , , ,