Mass velocity and cold-wall effects on critical heat flux in an advanced light water reactor

The characteristics of Critical Heat Flux (CHF) were investigated for a square array of rod bundles which could possibly be loaded into an integral-type advanced light water reactor. The parametric effects of the mass velocity and the unheated rod were examined by conducting CHF experiments with 5 × 5 test bundles in a Freon-loop. The influence of a cold wall on the CHF was interpreted by introducing a simple phenomenological model which accounts for the influence of a thermal mixing inside the boiling channel. A local parameter CHF correlation applicable to an integral-type reactor was developed from the CHF data base for square-arrayed rod bundles. The local thermal–hydraulic conditions calculated by the subchannel analysis code MATRA were used for the optimization of the correlation coefficients. Correction factors for the low mass velocity, spacer grids, and the non-uniform axial power shapes have been devised which reflected the results of the data assessment and the experimental observations. As a result of the thermal margin evaluation at steady state conditions, it was revealed that the integral-type reactor core has a greater DNBR margin than a typical 1000 MWe PWR core.