Three-dimensional accuracy of measurements made with software on cone-beam computed tomography images

Introduction: The purpose of this article was to evaluate the accuracy of measurements made on 9- and 12-in cone-beam computed tomography (CBCT) images compared with measurements made on a coordinate measuring machine (CMM), which is the gold standard. Methods: Ten markers were placed on a synthetic mandible, and landmark coordinates and linear and angular measurements were determined with the CMM. Three-dimensional CBCT images, measuring 9 and 12 in, were taken of the mandible with a CBCT machine (NewTom 3G, Aperio Services, Verona, Italy), and landmark coordinates and linear and angular measurements were obtained with AMIRA (Mercury Computer Systems, Berlin, Germany) software. Results: The coordinate intrareliability correlation coefficient was almost perfect between the 3-dimensional CBCT images and the CMM measurements. With the Student t test, we found no significant statistical difference between linear and angular measurements from the CMM and the NewTom 3G images, which differed less than 1 mm and 1°, respectively. Conclusions: The NewTom 3G produces a 1-to-1 image-to-reality ratio.