In Vitro Biomechanical Comparison of the Effect of Pattern, Inclination, and Size of Positional Screws on Load Resistance for Bilateral Sagittal Split Osteotomy

Under the conditions tested in this in vitro study, differences in the load resistance of positional screws placed in a transbuccal or intraoral approach could be demonstrated depending on the fixation technique. The transbuccal group of 3 screws in an inverted L pattern showed significantly greater stability than the intraoral group of 3 screws placed in an inverted L pattern and the transbuccal group of 3 screws in a linear pattern. Resistance to vertical loads with 1.85-mm screws was similar to that with the standard 2.0-mm screws in all 3 setups. The results of this study suggest that the angle of screw placement (surgical approach) and pattern have a greater influence on the stability of the bilateral sagittal split osteotomy system than the screw size.