Control based on techno-economic optimization of renewable hybrid energy system for stand-alone applications

• Control focused on optimizing the lifecycle costs of a stand-alone hybrid system.
• Combination of renewable sources, battery and hydrogen systems.
• The modeling includes the electric models of the components.
• The system assures reliable electricity support for stand-alone applications.

This paper presents an Energy Management System (EMS) for hybrid systems (HS) composed by a combination of renewable sources with the support of different storage devices (battery and hydrogen system) that allow its operation without the necessity of grid connection (i.e. a stand-alone system).The importance of the proposed EMS lies in taking into account economic issues that affect to the decision of which device of the HS must operate in each moment. Linear programming was used to meet the objective of minimizing the net present value of the operation cost of the HS for its whole lifespan. The total operation costs depend largely on the reposition costs of its components. Instead of considering predefined reposition years for each component and calculate their net present cost from them (as is commonly considered in other works), in this work it was proposed to use lifetime degradation models - based on the well-known statement that the lifetime depends on the hours of operation and the power profiles that the components are subjected to- from which the repositions are made to check how they affect to the cost calculation and, consequently, to the EMS performance.The behavior of the proposed control is checked under a long term simulation, in MATLAB-Simulink environment, whose duration is the expected lifespan of the HS (25 years). A conventional state-machine EMS is used as a case study to validate and compare the results obtained. The results demonstrate that the proposed HS and EMS combination assures reliable electricity support for stand-alone applications subject to different techno-economic criteria (generation cost and sustenance of battery SOC and hydrogen levels), achieving to minimize the operation cost of the system and extend their lifespan.