A new control strategy for active power line conditioner (APLC) using adaptive notch filter

This paper proposes a new adaptive control algorithm for a three-phase current-source shunt active power-line conditioner (APLC) operating under unbalanced and distorted network conditions. This control scheme aims at compensation of network’s reactive power, elimination of active power’s oscillating components, compensation of network current and voltage harmonic contents resulting in sinusoidal waveforms, and equilibrating the drawn power from the source evenly between the three-phases. Unlike many of the existing methods, the proposed strategy does not require any coordinate transformations or complicated calculations. The reference signals for the hysteresis-band current controlled voltage-source converter (HBCC-VSC) are generated by passing the measured current and voltage signals through two layers of modified adaptive notch filters (ANFs). To ensure superb performance and minimum total harmonic distortion (THD) level of the power system, parameters of the HBCC-VSC are obtained using differential evolution (DE) optimization algorithm. The proposed strategy is simple, easily implementable, and robust against uncertainty or variations of power system parameters and loads. The effectiveness of the proposed control scheme is validated by simulation results of a selected network under various load and power system conditions.

► A new adaptive control is proposed for a shunt active power-line conditioner.
► The reference currents are formed by means of modified adaptive notch filters.
► The parameters of the VSC controller are obtained using DE algorithm.
► The proposed strategy is very simple and easily implementable.