کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4074452 | 1267010 | 2011 | 8 صفحه PDF | دانلود رایگان |
Objectives and HypothesisThe humeral component in total elbow arthroplasty has limited geometric modularity, and the extent to which this affects accurate positioning is unknown. The objectives of this study were to (1) validate the accuracy of a computer-assisted implant alignment technique, and (2) identify variations in distal humeral morphology that affected computer-assisted implant alignment. This was achieved by implanting both an unmodified humeral component and an implant with a reduced stem using computer assistance. We hypothesized that implantation of a humeral component with a reduced stem length would be more accurate than implantation of the standard length stem. In addition, we hypothesized that the variation in flexion-extension (FE) varus-valgus angulation would significantly affect computer-assisted implant alignment.Materials and methodsComputer-assisted alignment of the implant articulating axis with the humeral FE axis was performed on 13 cadaveric humeri for both the regular and modified humeral component. Navigation was based on alignment of the prosthesis with a preoperative plan and registration of this plan to the humerus.ResultsImplant alignment was significantly improved for the reduced stem. Alignment error of the reduced stem averaged 1.3 ± 0.5 mm in translation and 1.2° ± 0.4° in rotation, compared with 1.9 ± 1.1 mm and 3.6° ± 2.1° for the regular stem. Humeral varus-valgus angulation significantly affected alignment of the unmodified stem.DiscussionA humeral component with a fixed valgus angulation cannot be accurately positioned in a consistent fashion without sacrificing alignment of the FE axis. Improved accuracy of implant placement can be achieved by introducing a family of humeral components, with 3 valgus angulations of 0°, 4° and 8°.
Journal: Journal of Shoulder and Elbow Surgery - Volume 20, Issue 6, September 2011, Pages 891–898