Measuring emissions of organophosphate flame retardants using a passive flux sampler

Flame retardants are used in polymers to reduce the flammability of building materials, electric appliances, fabric and papers. In recent years, organophosphate flame retardants have been used as substitutes for polybrominated flame retardants (BFRs). In Japan, the amount of organophosphate flame retardants used in 2001 was about five times more than in 2000. Recently, several studies have shown the health concerns for some organophosphate flame retardants. Little research has been performed on the emission of organophosphate flame retardants, especially the relationship between content and emissions. In this study, a new type of passive sampler was developed to measure emissions of organophosphate flame retardants from plastic materials. With this sampler, emissions from polyvinyl chloride wallpaper samples with different content of tris(2-chloroisopropyl)phosphate (TCPP) at different temperatures were examined. The observed maximum emissions of TCPP from 1, 3, 5, 10 and 20 w/w% content wallpaper materials were 262.3, 452.6, 644.8, 1119.1 and 2166.8 μg m−2 h−1, respectively. Emissions from 5% TCPP content materials at 40 and 60 °C were 1135.7 and 2841.2 μg m−2 h−1, respectively. A significantly positive correlation between the flux of TCPP and the TCPP content of the wallpaper samples was observed. A linear relationship was found between the inverse of temperature and the logarithm of TCPP emission. The results imply that the use of materials with a high organophosphate flame retardant content can lead to high emission rates in high-temperature indoor environments.