Modelling and optimization of power consumption in wireless access networks

The power consumption of wireless access networks will become an important issue in the coming years. In this paper, the power consumption of base stations for mobile WiMAX, fixed WiMAX, UMTS, HSPA, and LTE is modelled and related to the coverage. A new metric, the power consumption per covered area PCarea, is introduced, to compare the energy efficiency of the considered technologies for a range of bit rates. Assuming the model parameters are correct, the conclusions are then as follows. For a 5 MHz channel, UMTS is the most energy-efficient technology until a bit rate of 2.8 Mbps, LTE between 2.8 Mbps and 8.2 Mbps, fixed WiMAX between 8.2 Mbps and 13.8 Mbps and finally mobile WiMAX for bit rates higher than 13.8 Mbps. Furthermore, the influence of MIMO is investigated.For a 2 × 2 MIMO system, PCarea decreases by 36% for mobile WiMAX and by 23% for HSPA and LTE compared to the SISO system, resulting in a higher energy efficiency.The power consumption model for base stations is used in the deployment tool GRAND (Green Radio Access Network Design) for green wireless access networks. GRAND uses a genetic based algorithm and is applied on an actual case for the Brussels Capital Region, showing the possibilities of energy-efficient planning.