Olefin–maleic-anhydride copolymer based additives: A novel approach for compatibilizing blends of waste polyethylene and crumb rubber

• Experimental additives were at least as advantageous as commercial MA-g-PO ones.
• Lower concentration was needed from experimental additives than from commercial ones.
• Deterioration in tensile properties with CR loading without compatibilization.

In our work processing conditions and mechanical properties of waste polyethylene (PE)/crumb rubber (CR) blends have been improved by new types of compatibilizing additives synthesized from experimental olefin–maleic-anhydride copolymers at our laboratory.Compatibilizing additives have been introduced into the PE/CR blends in 0.2 wt% while CR concentration has been varied between 10 and 50 wt%. For comparison of the effects commercially available MA-g-PO type compatibilizing additives have also been applied. Tensile and Charpy impact tests of the compression moulded samples have been carried out.Several experimental additives have enhanced properties of the PE/CR blends either from the point of view of tensile or Charpy impact strength while commercial additives have had improving effects only on one of the abovementioned mechanical properties but not for both of them simultaneously. Since good mechanical properties could be achieved by our experimental compatibilizers good adhesion in the waste PE/CR samples have been considered and was proven by SEM graphs either.