Combining AHP with GIS for landfill site selection: A case study in the Lake Beyşehir catchment area (Konya, Turkey)

Landfills are the most common method for the disposal of municipal solid waste (MSW) in Turkey. However, determining the location of landfill sites is a difficult and complex process because it must combine social, environmental and technical parameters. Additionally, it depends on several criteria and regulations. The main objective of this study was to select of a landfill site for the Lake Beyşehir catchment area. The Beyşehir Lake is the largest freshwater lake and drinking water reservoir in Turkey, but there is no controlled landfill site in the region. Therefore, the landfill site should be determined such that the lake is protected. To determine the most suitable landfill site, an analytical hierarchy process (AHP) was combined with a geographic information system (GIS) to examine several criteria, such as geology/hydrogeology, land use, slope, height, aspect and distance from settlements, surface waters, roads, and protected areas (ecologic, scientific or historic). Each criterion was evaluated with the aid of AHP and mapped by GIS. Data were assorted into four suitability classes within the study area, i.e., high, moderate, low and very low suitability areas, which represented 3.24%, 7.55%, 12.70% and 2.81%, of the study area, respectively. Additionally, 73.70% was determined to be completely unsuitable for a landfill site. As a result, two candidate landfill sites are suggested and discussed. The final decision for landfill site selection will require more detailed field studies.