Application of a gas–solid fluidized bed separator for shredded municipal bulky solid waste separation

A laboratory-scale gas–solid fluidized bed separator able to separate fractions of 5.6–50 mm was used for separation of shredded municipal bulky waste (SBW) into combustibles and incombustibles. In batch-scale tests, it was found that accumulation of SBW in the bottom of the bed significantly reduced the separation efficiency. In this study, stirring was shown to be effective in preventing this accumulation. Flexible sheet materials such as paper and film plastics also significantly decreased the separation efficiency. In batch-scale tests, an overall efficiency of 90% was obtained when flexible materials such as film plastics and paper were excluded from the feed SBW. In continuous feeding tests, purities of the float and sink fractions attained 95% and 86% efficiencies, respectively, with an overall efficiency of 79%. The effect of feedstock shape on separation efficiency was also investigated. This study revealed that large particles can be properly separated on the basis of density, while the shape of the material significantly influenced behavior in the fluidizing bed.