Designing a purification process for chromium-, copper- and arsenic-contaminated wood

The disposal of chromated copper arsenate (CCA)-treated wood is becoming a serious problem in many countries due to increasing levels of contamination by the hazardous elements, chromium, copper and arsenic. The present experiment was conducted as a preliminary step toward one-step solvent extraction of CCA-treated wood. Because chromium, copper and arsenic have different chemical characteristics, it is best to consider them separately prior to designing a one-step extraction process. As a basis, various two-step extraction processes were first designed and tested experimentally to determine feasibility. Among these combinations, the treatment combining oxalic acid as the 1st step and a sodium oxalate solution under acidic conditions (pH 3.2) as the 2nd step was found to be an effective way of extracting CCA elements from treated wood. Extraction efficiency reached 100% for arsenic and chromium and 95.8% for copper after a 3-h sodium oxalate treatment, following a 1-h pre-extraction process with oxalic acid. On the other hand, the same combination under alkaline conditions (pH 11.2) during the 2nd step was ineffective for copper removal, indicating that pH plays an important role in complexation with sodium oxalate solution. The present results suggest that the extraction of CCA elements using a combination of oxalic acid and acidic sodium oxalate solution is a promising basis for application to a one-step extraction method.