Hygromechanical characterization of sunflower stems

This study concerns the determination of hygromechanical properties of sunflower stems. Mechanical tests were carried out on specimens of sunflower bark and pith. Particular attention was paid to the influence on the mechanical properties of (i) specimen location along the stem and (ii) moisture content of specimens. For this purpose, specimens were taken from the bottom, middle, and top of the stems. The influence of humidity on the mechanical properties was studied by testing specimens conditioned at three different relative humidities: 0% RH, 33% RH and 75% RH. Moisture diffusion coefficients of bark and pith were deduced assuming Fick's law to predict the variation in moisture content of the specimens during the mechanical test. The Young's modulus of the bark was found to be higher than that of the pith, whereas the moisture diffusion coefficient of the bark was lower than that of the pith. Mechanical and hygroscopic properties of specimens depended on their location along the stem. In order to explain these results, morphological observations have been carried out on the specimen at each location. It was found that porosity of both the bark and the pith are lower at the top of the stem. The presence of sclerenchyma in the bark is also higher at the top of the stem.

► The mechanical properties of sunflower stems were characterized.
► Bark and pith specimens were characterized separately.
► The Young's modulus of pith and bark is influenced by the location of the specimens.
► The Young's modulus of pith and bark decreases with the moisture content.