Coordinate mapping of analytical contaminant transport solutions to non-uniform flow fields

Existing analytical solutions to 2D and 3D contaminant transport problems are limited by the mathematically convenient assumption of uniform flow. An approximate method is developed herein for coordinate mapping of 2D (vertically-averaged) transport solutions to non-uniform steady-state irrotational and divergence-free flow fields in single-layer aquifers. The method enables existing analytical transport solutions to be applied to aquifer systems with wells, non-uniform saturated thickness, surface water features, and (to a limited degree) heterogeneous hydraulic conductivity and recharge. This mass-conservative coordinate mapping approach is inexact in its approximation of the dispersion process but is still sufficiently accurate for many simple flow systems. The degree of model error is directly proportional to the variation of velocity magnitude within the domain. These mapped analytical solutions are compared to numerical simulation results and the coordinate mapping errors are investigated. The methods described herein may be used in the traditional capacity of analytical transport models, i.e., screening and preliminary site assessment, without sacrificing accuracy by assuming locally uniform flow conditions or applying an ad-hoc coordinate transformation. The solutions benefit from the traditional advantages of analytical methods, particularly the removal of artifacts due to spatial and temporal discretization: no time-stepping or numerical discretization is required.