The application of a simplified method to map the aerobic acetate mineralization rates at the groundwater table of the Netherlands

A simplified method is used to assess the microbial activity of subsoils and soils across a broad geographic scale. Acetate was selected because it is a major intermediate in catabolic biochemical pathways. In order to get minimal disturbance, only a small amount of tritium labelled acetate and water is added to the subsoil material. After an incubation time, the subsoil material is separated from the water by centrifugation and the formed tritium labelled water is separated from the remaining acetate by evaporation. The data of 128 locations in the Netherlands were plotted in a soil map and were also compared with the depth, dry weight, electric conductivity, pH and nitrate concentration. The peat areas consisted of limed meadows with a high groundwater level whereas the sand areas often showed deeper groundwater levels and a lower pH. The subsoils at the groundwater table of the peat areas, which are in contact with soil air, showed a higher mineralization rate compared with the surface soils in our study. In contrast, the mineralization rate of the subsoil at the groundwater table of sandy soils showed on average a factor 30 lower rate. Nevertheless, the self purification capacity of the subsoil can be vital under weather conditions where the surface soil becomes less active.

Research Highlights
► The mineralization of organics at the groundwater table is a vital ecosystem service.
► Tritium labeled acetate was used to monitor the mineralization at 128 locations.
► The data were plotted on a map of the Netherlands and compared with soil properties.
► Limed peat subsoils showed about a factor 30 higher rate compared with sandy subsoils.