Evaluation of processing qualities of tomato juice induced by thermal and pressure processing

Effects of processing conditions including hot-break processing (92 °C for 2 min), cold-break processing (60 °C for 2 min) and hydrostatic pressure treatments (100–500 MPa) at different temperatures (4, 25 and 50 °C) for 10 min on quality aspects of tomato juice were investigated. Both hot- and cold-break processing induced significant changes in color, viscosity and radical-scavenging capacity of tomato juice compared with control (fresh tomato juice); moreover, hot-break processing induced a specific range of reduction of pectin methylesterase (PME) and polygalacturonase (PG) activities. Pressure treatments at and below 200 MPa at 4 and 25 °C maintained the color, extractable total carotenoids and lycopene, and radical-scavenging capacity; further, those at 500 MPa at 4 and 25 °C improved all the quality attributes the most except inactivation of PME in this study. The residual activity of PME showed the lowest after treating by 200 MPa at 25 °C; however, the PME activity was enhanced by treatments at 300–500 MPa and various temperatures. The residual activity of PG decreased gradually to 72% with pressure elevated from 100 to 400 MPa at 4 and 25 °C, further, that declined quickly to 10% after 500 MPa treatments. This research clearly shows that it is possible to selectively produce good tomato juice products by high pressure processing at ambient temperature.