Enhancing hardrock seismic images: Reprocessing of high resolution seismic reflection data from Vihanti, Finland

• We reprocessed a reflection seismic profile from Vihanti VHMS deposit, Finland.
• Low stacking velocity proved to be diagnostic for known fracture zone.
• Cross-dip analysis revealed diffraction possibly originating from massive sulfide.
• Vihanti structure has developed through significant thrust faulting.

Seismic reflection data were acquired across volcanic hosted massive sulfides (VHMS) of Vihanti in order to improve the understanding of the regional geological setting. Commercially processed seismic data from Vihanti are of good quality, but reprocessing can be used to extract additional information about geological structures. Especially, careful velocity analysis influences the quality of seismic images. Differentiating reflections caused by fractures from those caused by lithological contacts is very important for exploration and geological modeling. Reflections from fracture zones known from drilling stack with lower velocity (~ 5100 m/s) compared to typical stacking velocities of the Vihanti area (> 5500 m/s). The reprocessing also indicated that fracture zones are better imaged with low frequencies due to the better overall continuity of the fault zones at scales of hundreds of meters rather than at shorter seismic wavelengths.In full stacks, long offset data can mask structure close to the surface. More detailed seismic images of the shallow subsurface emerged by preferentially stacking short offset data wherever acquisition and processing lines lay close together and were nearly straight. Long offset data remains valuable for imaging deeper structures as well as dipping reflectors. Cross-dip-analysis revealed a bright diffractor located near the base of the Vihanti volcanic basin at 1.5 km depth. The seismic data allow a geological interpretation in which the Vihanti structure has developed through significant thrust faulting and displacement of the lithological contacts. Gentle folds that were formed prior to faulting are visible as undulating reflectivity in seismic sections. The reprocessed seismic section indicates a potential deep extension of the ore-hosting altered volcanic and calc-silicate rocks previously unexplored.