کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4913314 | 1428760 | 2017 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Automated processing of dense points clouds to automatically determine deformations in highly irregular timber structures
ترجمه فارسی عنوان
پردازش اتوماتیک ابرهای متراکم به طور خودکار تغییرات در ساختارهای چوبی بسیار نامنظم را تعیین می کند
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ابرهای نقطه، مدل سازی سه بعدی، انحراف، چوب،
ترجمه چکیده
سازه های چوبی اغلب در مقاطع طولی، به طور عمده در ساختمان های قدیمی، مقاطع نامنظم دارند. این بی نظمی ممکن است پارامتر حیاتی باشد که در طول تجزیه و تحلیل تغییر شکل این سازه ها مورد توجه قرار گیرد. هدف این مقاله پیشنهاد و توسعه یک الگوریتم جدید است که به صورت خودکار برآورد تغییرات تابلوهای چوبی که دارای بی نظمی های هندسی مهم با استفاده از تکنولوژی اسکن لیزر است. الگوریتم پیشنهادی برای تعریف تغییرات مبتنی بر قضیه مور است. این روش در پرتوهایی است که تحت دو بار مختلف قرار گرفته است. نتایج به دست آمده با روش های ارتباطی مقایسه شده و تفاوت کمتر از 5٪ است. نتایج بدست آمده نشان می دهد که روش پیشنهاد شده برای تجزیه و تحلیل خودکار تغییر شکل در سازه های چوبی نامنظم مناسب است.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
Timber structures frequently present irregular cross-sections along their length, principally in old buildings. This irregularity may be a critical parameter to take into account during the deformation analysis of these structures. The aim of this paper is to propose and develop a new algorithm that automatically estimates the deformations of timber beams that have important geometric irregularities by using laser scanning technology. The proposed algorithm to determine deformations is based on Mohr's Theorems. The method is validated in a beam that is subjected to two different loadings. The results are compared with those obtained by contact methods and the differences are less than 5%. The results obtained demonstrate that the method proposed is suitable for the automatic analysis of deformation in irregular timber structures.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Construction and Building Materials - Volume 146, 15 August 2017, Pages 393-402
Journal: Construction and Building Materials - Volume 146, 15 August 2017, Pages 393-402
نویسندگان
M. Cabaleiro, J. Hermida, B. Riveiro, J.C. Caamaño,