کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4913423 1428769 2017 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effect of elevated temperature and cooling regimes on mechanical and durability properties of concrete containing waste rubber fiber
ترجمه فارسی عنوان
اثر دما و رطوبت خنک کننده بر خواص مکانیکی و دوام بتن حاوی فیبر لاستیک زائد
کلمات کلیدی
درجه حرارت بالا، خنک کننده سریع مدول الاستیک استاتیک، مدول الاستیک پویا، نفوذ پذیری آب، نفوذ پذیری کلرید، بتن ریزی شده، ارزیابی آتش نشانی
ترجمه چکیده
تجمع تایر زباله یک مشکل اساسی است زیرا تخریب این لاستیک ها به شدت دشوار است. نتایج مطالعات تجربی موجود برای بتن ریزی شده توصیه ای قوی برای استفاده از این ضایعات ارائه می دهد که در آن قدرت نگرشی عمده ای نیست. اثر جایگزینی جزئی مخلوط خالص الیاف لاستیک الیه بر خواص بتن تحت فشار بالا در این مقاله مورد بررسی قرار گرفته است. یک بررسی تجربی سیستماتیک به منظور بررسی اثر دمای بالا بر مقاومت فشاری، از دست دادن جرم، مدول استاتیک کششی، مدول پویا کشش، نفوذ پذیری آب و نفوذ پذیری کلراید یونی مخلوط کنترل شده (بدون جایگزینی دانه های خرد شده توسط لاستیک فیبر) و الیاف بتونی الیاف دو نوع خنک کننده، خنک کننده نرمال و خنک کننده سریع برای اثر بر مقاومت فشاری مورد توجه قرار گرفته است. شش درجه حرارت با سه دوره قرار گرفتن در معرض در این مطالعه در نظر گرفته شده است برای همه نمونه ها. تجزیه و تحلیل میکروساختار بتن الیاف لاستیکی نیز به منظور بررسی اثر دمای بالا بر روی الگوی ترک و اتصال فیبر لاستیک و ماتریس سیمان انجام شده است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
Accumulation of the waste tire is a major problem as degradation of these tires is extensively difficult. The results of experimental studies available for rubberized concrete provide a strong recommendation for the use of this waste where strength is not a major concern. The effect of partial replacement of fine aggregate by waste rubber fiber on the properties of concrete subjected to elevated temperature has been evaluated in this paper. A systematic experimental investigation has been carried out to evaluate the effect of elevated temperature on compressive strength, mass loss, static modulus of elasticity, dynamic modulus of elasticity, water permeability and chloride-ion permeability of control mix (no replacement of fine aggregate by rubber fiber) and waste rubber fiber concrete. Two types of cooling, normal cooling and fast cooling have been considered for the effect on compressive strength. Six levels of temperature with three exposure durations have been considered in this study for all the specimens. Microstructure analysis of waste rubber fiber concrete has also been carried out to investigate the effect of elevated temperature on crack pattern and bonding of rubber fiber and cement matrix.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Construction and Building Materials - Volume 137, 15 April 2017, Pages 35-45
نویسندگان
, , , ,