The use of different by-products in the production of lightweight alkali activated building materials

The results showed that highly porous lightweight building materials could be obtained, with densities ranging from 380 to 470 kg/m3, heat conductivities ranging between 0.14 and 0.15 W/m·K, and compressive strengths ranging between 1.1 and 2.0 MPa. It was also shown that the main hydration products were amorphous aluminosilicate gels, whereas the crystalline compounds from the SPW remained in the structure of the AAM. The results of X-ray micro-tomography showed that lightweight AAM contained 72.0-89.0 vol% of pores, with sizes ranging between 1 and 5 mm. In the paper a brief description is given of the waste management method which can be applied to obtain materials that can be used in the building industry as lightweight load-bearing insulation materials.