The influence of neutron activated products in BIXS method for tungsten

Tritium β-decay Induced X-ray Spectroscopy (BIXS) is a promising method to obtain tritium retention details both on surface and in bulk of plasma facing materials (PFMs) in magnetic fusion devices. Influence of neutron activated products (NAPs) is one of the primary problems in BIXS, since the energy of Compton scattering photons and characteristic X-rays is close to the range of tritium β-rays. In this paper, Monte Carlo simulation was introduced to evaluate effects of NAPs in BIXS measurements for tungsten. Three steps are included in simulation, neutron flux simulation to reckon the neutron flux in PFMs based on the simplified model of ITER, activated products calculation to compute the distribution of NAPs in PFMs and radiation spectra simulation to calculate the spectra of NAPs in PFMs sample. Six typical nuclides (including W-185, W-181 and Re-188, etc.) produced by neutron irradiation were considered in this study. Finally, influence of NAPs was estimated quantitatively with the assumption that 1% of DT fuel retained in PFMs uniformly. It is found that the intensity of spectrum devoted by NAPs is as much as 10.6 times larger than it by tritium in the same region of interest (ROI) directly after reactor shutdown, while it will reduce to 0.83% after 19 months.