A method for correcting field strain measurements to account for temperature effects

Measurements of deformation and strain are of critical importance for the structural health monitoring of geosynthetic reinforced soil (GRS) structures. For some commonly used wiring configurations and sensors, field strain measurements can exhibit apparent strains that are caused by changes in wire temperature or changes in gauge temperature, which do not correspond to changes in actual strain in the geosynthetic. Correcting for these effects is important for separating out real structural behavior from wiring and sensor issues, and is imperative for avoiding false trigger warnings in automated instrumentation reporting systems. The current paper consequently presents a method for correcting field strain measurements to account for temperature effects. Data collected from sensors embedded in a heavily-instrumented GRS abutment over a two-year monitoring period is presented. The distributed thermistor array embedded in the GRS abutment is shown to be particularly useful for understanding temperature effects on the measured foil strain gauge data. The presented approach and associated framework for data correction are useful for practicing engineers and other researchers, as the general concepts from this study can be applied to data collected from many instrumented geosynthetic field projects.