کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4922672 | 1430194 | 2016 | 36 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Implementation and validation of a three dimensional damaging finite strain viscoelastic model
ترجمه فارسی عنوان
اجرای و اعتبارسنجی یک مدل ویسکوالاستیک کرنش آسیب دیده سهبعدی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ترجمه چکیده
در این مقاله، یک مسیر کامل برای ساخت یک مدل سازمانی که به خوبی برای تجزیه و تحلیل عناصر محدود از رسانه های واسکولاسیون تحت تغییر شکل و آسیب بزرگ است، توصیف شده است. به طور خاص، یک روش کالیبراسیون سیستماتیک، تأیید و اعتبار سنجی از اجرای یک مدل سازنده پروانه جامد توسعه یافته است. به عنوان قدم اول یک مدل سه بعدی معتبر برای تمامی محدوده تغییر شکل انتخاب شده و به عنوان یک کاربر در نرم افزار عنصر محدود تجاری انجام شده است. گام دوم شامل کالیبراسیون مدل بدون آسیب و تایید الگوریتم در برابر مدل داخلی ساخته شده در نرم افزار است. در مرحله سوم پارامترهای آسیب با استفاده از مجموعه ای از داده های آزمون پروانه جامد تعیین شد. در نهایت، مدل سازمانی کامل با مقایسه نتایج با داده های آزمون که در کالیبراسیون مورد استفاده قرار نگرفت، معتبر بود. برای هر دو تأیید و اعتبار، حالت های تغییر شکل همگن و غیر همجنس در نظر گرفته شد و انواع مختلف عناصر مورد بررسی قرار گرفت. رویکرد جامع که در مقاله ارائه شده، هدف از تأکید بر نیاز به روش شناسی است که باید برای استفاده موفق از یک مدل سازمانی در یک تحلیل استرس محاسباتی مورد استفاده قرار گیرد.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
In this paper a complete pathway to construct a constitutive model well suited for finite element analysis of viscoelastic media undergoing large deformation and damage is described. In particular, a systematic calibration, verification and validation procedure of the implementation of a solid propellant constitutive model was developed. As a first step a three dimensional model valid for all deformation ranges was selected and implemented as a user material into commercial finite element software. The second step consisted of calibrating the model without damage and verifying the algorithm against the built-in material model available in the software. In the third step the damage parameters were determined using a set of solid propellant test data. Finally, the full constitutive model was validated by comparing the results with the test data not used in the calibration. For both verification and validation, homogeneous and inhomogeneous deformation states were considered, and various element types were investigated. The comprehensive approach outlined in the paper aims to emphasize the need of a methodology to be followed for a successful use of a constitutive model in a computational stress analysis.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Solids and Structures - Volumes 102â103, 15 December 2016, Pages 275-285
Journal: International Journal of Solids and Structures - Volumes 102â103, 15 December 2016, Pages 275-285
نویسندگان
Birkan Tunç, Åebnem Ãzüpek,