Trailing-edge flow control for wind turbine performance and load control

This paper reports an investigation into the performance of trailing-edge flow control devices on horizontal axis wind turbines by solving the three dimensional Reynolds averaged Navier-Stokes equations in the rotational framework. The validation case selected for this work is the NREL Phase VI blade with wind tunnel experimental data. The trailing-edge flow control devices studied include microtabs and microjets installed near the trailing-edge of the rotating blade. The divergent trailing-edge is also included in the study as a passive flow control device due to its practical interest. These trailing-edge devices are implemented on the fixed-pitch NREL Phase VI blade, using the original performance and flow characteristics as a benchmark. Both 2D and 3D simulations are carried out in order to investigate the suitability of the 2D blade sectional design analysis and control for the actual 3D rotating blades.