کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
495884 862844 2012 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A multi-objective approach for the motion planning of redundant manipulators
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر نرم افزارهای علوم کامپیوتر
پیش نمایش صفحه اول مقاله
A multi-objective approach for the motion planning of redundant manipulators
چکیده انگلیسی

Kinematic redundancy occurs when a manipulator possesses more degrees of freedom than those required to execute a given task. Several kinematic techniques for redundant manipulators control the gripper through the pseudo-inverse of the Jacobian, but lead to a kind of chaotic inner motion with unpredictable arm configurations. Such algorithms are not easy to adapt to optimization schemes and, moreover, often there are multiple optimization objectives that can conflict between them. Unlike single optimization, where one attempts to find the best solution, in multi-objective optimization there is no single solution that is optimum with respect to all indices. Therefore, trajectory planning of redundant robots remains an important area of research and more efficient optimization algorithms are needed. This paper presents a new technique to solve the inverse kinematics of redundant manipulators, using a multi-objective genetic algorithm. This scheme combines the closed-loop pseudo-inverse method with a multi-objective genetic algorithm to control the joint positions. Simulations for manipulators with three or four rotational joints, considering the optimization of two objectives in a workspace without and with obstacles are developed. The results reveal that it is possible to choose several solutions from the Pareto optimal front according to the importance of each individual objective.

Figure optionsDownload as PowerPoint slideHighlights

► A new technique to solve the inverse kinematics of redundant manipulators is presented.
► This scheme combines the closed-loop pseudo-inverse method with a multi-objective genetic algorithm (CLMOGA).
► Simulations for manipulators with three or four rotational joints in a workspace without and with obstacles are developed.
► Two objectives optimization were considered: the joint displacement and the positional error.
► It is possible to choose several solutions from the Pareto front according to the importance of each individual objective.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Soft Computing - Volume 12, Issue 2, February 2012, Pages 589–599
نویسندگان
, , ,