کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4971881 1450536 2016 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Charging-discharging characteristics of a wound aluminum polymer capacitor
ترجمه فارسی عنوان
ویژگی های شارژ-تخلیه یک خازن پلیمری آلومینیوم زبر
ترجمه چکیده
این مطالعه خازن های پلیمری آلومینیوم را مشخص می کند، به خصوص زمانی که آنها شارژ و تخلیه می شوند. تست ها تحت شرایط مختلف انجام شد. محیط های زیر مورد توجه قرار گرفتند: سه درجه حرارت بالا، دو درجه حرارت بالا / رطوبت بالا و دمای اتاق. شرایط عملیاتی مختلف نیز در نظر گرفته شده است، مانند شارژ-تخلیه، عملیات و ذخیره سازی. نتایج آزمون نشان داد که ظرفیت خازن آلومینیوم پلیمر زخم با تخلیه شارژ در دمای پایین تخریب می شود. در دمای پایین، این ویژگی شتاب گرفت اما با الکترولیت خشک شد. ظرفیت های تخریب شده تقریبا زمانی که خازن ها در دمای بالا ذخیره می شوند، بهبود یافتند. این خصوصیات برای یک خازن آلومینیومی مایع معمولی مشاهده نشد. این خصوصیات گزارش نشده از خازن های آلومینیومی پلیمر هنگام طراحی سیستم هایی مانند الکترونیک قدرت باید در نظر گرفته شود. خازن های پلیمری برای قابلیت اطمینان بالا، مخصوصا در دماهای بالا شناخته شده اند. با این حال، در دمای پایین، ویژگی شارژ-تخلیه باید به دقت مورد توجه قرار گیرد. این مقاله در مورد این ویژگی خازن های پلیمری برای صنایع مورد توجه قرار گرفته است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر سخت افزارها و معماری
چکیده انگلیسی
This study characterized aluminum polymer capacitors, especially when they are charging and discharging. Tests were conducted under various conditions. The following environments were considered: three high-temperature conditions, two high temperature/high humidity conditions, and room temperature. Various operating conditions were also considered, such as charging-discharging, operating, and storage. The test results showed that the capacitance of the wound polymer aluminum capacitor degraded with charging-discharging at low temperature. At lower temperatures, this characteristic accelerated but was mitigated with a dry electrolyte. The degraded capacitances partially recovered when the capacitors were stored at a high temperature. These characteristics were not observed for a conventional liquid aluminum capacitor. This unreported special characteristic of polymer aluminum capacitors should be considered when designing systems such as power electronics. Polymer capacitors are known for their high reliability, especially at high temperatures. At low temperatures, however, the charging-discharging characteristic should be carefully considered. This paper reports on this characteristic of polymer capacitors for consideration by industries.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Microelectronics Reliability - Volume 64, September 2016, Pages 447-452
نویسندگان
, , , , , , , ,