کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4985871 1454791 2017 13 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Influence of the real dimple shape on the performance of a textured mechanical seal
ترجمه فارسی عنوان
تاثیر شکل شیب واقع در عملکرد یک مهر و موم مکانیکی بافت
کلمات کلیدی
ترجمه چکیده
بافتن سطح چهره اصطکاک مهر و موم مکانیکی، اصطکاک و همچنین نشت و سایش را کاهش می دهد، جایی که شمعهای ساخته شده روی سطح، تشکیل یک فیلم کامل روانکاری در رابط مهر و موم را بهبود می بخشد. شبیه سازی عددی برای تعیین پارامترهای سطح بهینه برای شرایط عملیاتی بررسی مهر و موم استفاده شده است. هندسه ابعاد معرفی شده در مدل، یک شکل کامل را در نظر می گیرد، اما ماشینکاری باعث می شود که شکل های نازک از لحاظ زبری در لبه ها، عدم زاویه های تیز، مرزهای تغییر شکل و غیره ناقص باشند. اثر هندسه واقعی باید در نظر گرفته شود تا تأیید شود که بافتن سطح نتایج مورد نظر را فراهم می کند. در مقاله حاضر، با استفاده از پلاسمای دمای پایین همراه با درمان سطحی ترمو شیمیایی روی حلقه های آب بندی فولاد ضد زنگ، بافتن سطح انجام می شود. اشکال هندسی واقعی در مدل روانکاری هیدرودینامیکی تجزیه و تحلیل می شود. تاثیر انواع نقصها مورد بررسی قرار گرفته است. نشان داده شده است که یک حد بالاتر از نقایص سطحی، اثرات مثبت بافت را از بین می برد. کنترل پارامترهای نازک هنگام انجام بافتن سطح اهمیت دارد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی شیمی کلوئیدی و سطحی
چکیده انگلیسی
Surface texturing the friction faces of a mechanical seal reduces friction as well as leakage and wear, where dimples machined on the surface enhance the formation of a full lubricating film in the seal interface. Numerical simulation is used to determine the optimal surface texturing for the investigated operating conditions of the seal. The geometry of the dimples introduced in the model assume a perfect shape, but machining causes the dimple shapes to be imperfect in terms of the roughness in the dimples, absence of sharp angles, deformed boundaries, and so on. The effect of the real geometry must be considered to confirm that surface texturing will provide the desired results. In the present work, surface texturing is performed using low-temperature plasma coupled with a thermo-chemical surface treatment on stainless steel sealing rings. The real dimple shapes are analysed and considered within the hydrodynamic lubrication model. The influence of different types of defects is studied. It is shown that there is a limit above which surface imperfections dispel the texture's positive effects. Controlling the dimple shapes is important when performing surface texturing.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 115, November 2017, Pages 409-416
نویسندگان
, , , , , ,