کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4985909 | 1454790 | 2017 | 29 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Formation of a nanocrystalline recrystallized layer during microabrasive wear of a cobalt-chromium based alloy (Co-30Cr-19Fe)
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The tribological behavior of a cast cobalt-chromium alloy, during microabrasion testing, was investigated. The alloy's microstructure contains coarse grains of fcc cobalt rich dendrites, interdendritic segregations and almost no precipitates. The tests were done using a 0.1 g/cm3 Al2O3/distilled water slurry, 0.3 N applied load and 20 rpm rotational speed. Two-body abrasion (grooving wear) was the dominating wear micromechanism. A severely deformed nanocrystalline layer containing random oriented â¼20 nm grains was observed, immediately below the worn surface. Finite element modeling of a single Al2O3 particle scratching the Co-Cr alloy surface showed that severe plastic deformation occurs in a region 1-2 μm beneath the worn surface, giving rise to the observed nanocrystalline layer.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 116, December 2017, Pages 105-112
Journal: Tribology International - Volume 116, December 2017, Pages 105-112
نویسندگان
Flávio Parreiras Marques, Cherlio Scandian, Antonio César Bozzi, Newton Kiyoshi Fukumasu, André Paulo Tschiptschin,