کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4986115 | 1454798 | 2017 | 51 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Wear rate impact on Ti-6Al-4V fretting crack risk: Experimental and numerical comparison between cylinder/plane and punch/plane contact geometries
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Fretting can lead to surface wear and/or crack nucleation depending on the sliding condition and contact geometry. To formalize this aspect, Ti-6Al-4V cylinder/plane and punch/plane contacts were investigated. The experimental crack nucleation domains in partial and gross slip conditions were established and simulated combining SWT cumulative damage analysis with FEM surface wear simulations. Good correlations were achieved if the experimental boundary conditions including system tangential accommodation and micro-rotations measured using DIC analysis, were considered. Fretting maps were simulated by predicting partial slip and gross slip displacement amplitudes above which cracks were respectively nucleated and removed by surface wear. Finally, it was shown that whatever the contact geometry, the gross slip cracking domain was inversely proportional to the surface wear rate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 108, April 2017, Pages 32-47
Journal: Tribology International - Volume 108, April 2017, Pages 32-47
نویسندگان
P. Arnaud, S. Fouvry, S. Garcin,