کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4986156 1454797 2017 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Dynamic torsional characteristics of mine hoisting rope and its internal spiral components
ترجمه فارسی عنوان
خصوصیات پیچشی دینامیکی طناب کوهنوردی و اجزای مارپیچی داخلی آن
کلمات کلیدی
طناب بلند اجزای مارپیچ داخلی، خصوصیات پیچشی پویا،
ترجمه چکیده
خصوصیات پیچشی دینامیکی طناب کوهی و قطعات مارپیچی داخلی آن در این مطالعه مورد بررسی قرار گرفت. مدل های تئوری تنش های بخش های طناب در مکان های مشخص برای ارائه تنش های طناب پویا ارائه شده است. مدل های نظری گشتاور، زاویه چرخش واحد، زاویه پیچشی، پارامترهای چرخش و تنش تورشی معرفی شدند تا ویژگی های چرخشی طناب دار و قطعات مارپیچی داخلی آن را تحت فشار قرار دهند. تست های طناب برای به دست آوردن اعتبار خواص پیچشی پویا طناب تحت تنش های نوسان انجام شد. نتایج نشان می دهد که روند نوسان سه مرحله ای تنش طناب و گشتاور. افزایش زمان بارگیری موجب کاهش زاویه پیچشی طناب می شود، نوسانات روند صعودی زاویه چرخش یونی طناب، رشته مارپیچی و سیم فولادی، به ترتیب، افزایش نوسان در زاویه های نازک رشته مارپیچی و سیم های فولادی، و نوسان کاهش طول نازک رشته مارپیچی. افزایش فاصله بین بخش طناب و مفاصل چرخ اصطکاک باعث کاهش در ابتدا و پس از آن افزایش در زاویه چرخش واحد در موارد طناب، رشته های مارپیچی و سیم های فولادی، افزایش در ابتدا و سپس کاهش در چرخش طناب زاویه، زاویه ناز افزایش یافته و طول نازک رشته مارپیچی را کاهش داده، در ابتدا کاهش می یابد و سپس افزایش تنش تورشی سیم فولادی در هر لایه رشته مارپیچی.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی شیمی کلوئیدی و سطحی
چکیده انگلیسی
Dynamic torsional characteristics of mine hoisting rope and its internal spiral components were investigated in the present study. Theoretical models of tensions of rope segments at distinct locations were presented to obtain dynamic rope tensions. Theoretical models of torque, unit torsion angle, torsion angle, twisting parameters, and torsional stress were introduced to investigate dynamic torsional characteristics of hoisting rope and its internal spiral components under tension. Rope tests were conducted in order to validate dynamic torsional properties of the rope under fluctuation tensions. The results show three-stage fluctuating trends of rope tension and torque. An increase of hoisting time induces a decreased torsion angle of the rope, fluctuating upward trends of unit torsion angles of the rope, spiral strands and steel wires, respectively, fluctuating increases in lay angles of the spiral strand and steel wires, respectively, and the fluctuating decreased lay length of the spiral strand. An increase of the distance between rope segment and friction pulley tangent causes a decrease at first and then an increase in the unit torsion angle in cases of the rope, spiral strands and steel wires, an increase at first and then a decrease in the rope torsion angle, increased lay angle and decreased lay length of the spiral strand, a decrease at first and then an increase in the torsional stress of steel wire in every layer of the spiral strand.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 109, May 2017, Pages 182-191
نویسندگان
, , , , ,