کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5012745 | 1462817 | 2017 | 14 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Modelling and parametric study of an efficient Alpha type Stirling engine performance based on 3D CFD analysis
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
انرژی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The CFD model was used to carry out a parametric study to investigate the effects of various design parameters and operating conditions such as, regenerator porosity, charge pressure, matrix wire diameter, dead volume and hot/cold ends temperatures on the engine performance in terms of power output through predicting the PV diagram of the engine. Results showed that maximum power can be achieved by increasing the porosity up to 80% and the wire matrix diameter to 0.02 mm at a temperature of the hot and cold sides at 600 °C and 20 °C respectively. Further decreasing of the cold end temperature to â20 °C can produce 162 W. For the heater and the cooler volumes, it was found that a height of 140 mm produced the highest engine power output of 170 W. This work highlights the potential of using CFD modelling to improve the design parameters and operating conditions to enhance the performance of alpha type Stirling engines.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy Conversion and Management - Volume 145, 1 August 2017, Pages 93-106
Journal: Energy Conversion and Management - Volume 145, 1 August 2017, Pages 93-106
نویسندگان
Ahmad K. Almajri, Saad Mahmoud, Raya Al-Dadah,