کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5015051 | 1463721 | 2017 | 18 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fatigue crack growth in cruciform welded joints: Influence of residual stresses and of the weld toe geometry
ترجمه فارسی عنوان
رشد ترک خستگی در اتصالات جوش داده شده کریستال: تاثیر تنش های باقی مانده و هندسه جفت انگشت
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
چکیده انگلیسی
The aim of the present investigation is to calculate the fatigue life of cruciform welded joints by taking into account both the effect of residual stresses and the influence of the weld toe geometry. Two and three dimensional finite element models, with cracks as initial defects, will be constructed for this purpose. Fatigue crack growth analyses are performed by using the node release technique, together with the finite element program ABAQUS. The welding residual stresses, as well as the plasticity induced crack closure effects, are considered. The effective cyclic J-integral (ÎJeff) is used as crack tip parameter in a relation similar to the Paris equation for the calculation of the fatigue life. For this purpose, a specific code was written for the determination of ÎJeff at each crack length configuration. The impact of residual stresses on ÎJeff as well as on the fatigue life during short crack growth is investigated. Results reveal that the influence of residual stresses can be neglected only for large load amplitudes. The calculated fatigue lives are compared with experimental data and a good accordance between both results is achieved. The influences of the weld toe radius and of the weld flank angle are also investigated.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Fatigue - Volume 101, Part 2, August 2017, Pages 253-262
Journal: International Journal of Fatigue - Volume 101, Part 2, August 2017, Pages 253-262
نویسندگان
D. Tchoffo Ngoula, H.Th. Beier, M. Vormwald,