کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5015218 | 1463727 | 2017 | 32 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of temperature and thermal cycling on fatigue crack growth in aluminium reinforced with GLARE bonded crack retarders
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper presents results of fatigue crack growth testing of aluminium alloy 2624-T351 reinforced by bonded crack retarders made of GLARE fibre-metal laminate. Specimens were tested at room temperature, 70 °C and â60 °C. Better performance of the crack retarders in terms of increased fatigue life was achieved at room temperature than at the two temperature extremes. This is attributed to a combined effect of change in the fatigue crack growth rate at temperature in the substrate material, and residual stress generated at temperatures above or below room temperature. The change in fatigue crack growth rate was measured, and the substrate deformation and the stress intensity factors at temperature were calculated by Finite Element Analysis. In addition, the effect of thermal cycling on fatigue crack growth rate was investigated by exposing the specimens to repeated thermal cycles between 70 °C and â60 °C prior to fatigue testing. It is concluded that the pre-test thermal cycling has little effect on the fatigue crack growth rate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Fatigue - Volume 98, May 2017, Pages 53-61
Journal: International Journal of Fatigue - Volume 98, May 2017, Pages 53-61
نویسندگان
Abdul Khadar Syed, Xiang Zhang, James E. Moffatt, Michael E. Fitzpatrick,