کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5021804 1469376 2017 29 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Surface characterisation and wetting properties of single basalt fibres
ترجمه فارسی عنوان
خصوصیات سطح و خواص مرطوب الیاف تک بازالت
کلمات کلیدی
الیاف بازالت، مرطوب کننده تجزیه و تحلیل سطح،
ترجمه چکیده
الیاف بازالت اظهار داشتند که مقاومت به درجه حرارت بالا نسبت به الیاف شیشه نشان می دهد که چشم انداز بهتر برای فرآیند بازیافت حرارتی کامپوزیت باقی مانده در حالی که حفظ کارآیی تقویت کننده کافی است. به خوبی شناخته شده است که عوامل اندازه گیری بر روی آغشته سازی تقویت کننده های فیبر در تولید کامپوزیت تاثیر می گذارند که بر رفتار مکانیکی کامپوزیت ها تاثیر می گذارد. با این وجود، به استثنای برخی مطالعات در مورد اثرات متقابل عامل بر چسبندگی بین الیاف بازالت و ماتریکس، در ادبیات در خصوص ویژگی های خیس کردن الیاف بازالت، اطلاعاتی وجود ندارد. سهم اصلی این مطالعه تجزیه و تحلیل خواص سطح و رفتار خیس کردن الیاف بازالت با اندازه گیری بهینه شده برای هر دو ماتریس گرماسخت و گرمانرم است. اندازه گیری زاویه تماس استاتیک با استفاده از یک روش تنسیمتریک برای الیاف تک سلولی برای تعیین انرژی سطحی و اجزای آن انجام شد. تغییرات خواص سطح به علت درمان شیمیایی و قرار گرفتن در معرض دمای بالا نیز مورد بررسی و بحث قرار گرفت.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
چکیده انگلیسی
Basalt fibres are claimed to show better high temperature resistance compared to glass fibres, suggesting better prospects to survive an end-of-life composite thermal recycling process while preserving an adequate reinforcing efficiency. It is well known that sizing agents affect impregnation of fibre reinforcements during composite manufacturing, which influences the overall mechanical behaviour of the resulting composites. However, with the exception of some studies about coupling agent effects on the adhesion between basalt fibres and matrix, no information are present in literature on the wetting characteristics of basalt fibres. The main contribution of this study is the analysis of the surface properties and wetting behaviour of basalt fibres with sizing optimised for both thermoset and thermoplastic matrices. Measurements of static contact angles were performed with a tensiometric procedure designed for singles fibres, in order to determine their surface energy and its components. Modifications of surface properties due to chemical treatments and high temperature exposure were also investigated and discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part B: Engineering - Volume 109, 15 January 2017, Pages 72-81
نویسندگان
, , , , , ,