Fabrication of carbon nanotube arrays for field emission and sensor devices by nanoimprint lithography

This work brings forth the idea of incorporating insulation in the resist used for ultraviolet (UV) curing nanoimprint lithography (NIL). Carbon nanotubes (CNTs) are grown in the space between two insulated resist patterns on the conductive substrate to make CNTs arrays. Two imprinting processes, soft UV curing NIL with DRPPR process and novel NIL without cured residual resist, are presented to achieve the insulation patterns. First the fabricating process is performed using a polydimethylsiloxane (PDMS) stamp. Subsequently, inductively coupled plasma (ICP) is essential to wipe off the residual resist film. To avoid the ICP process, a novel UV curing NIL is presented. Its special hard quartz stamp with chrome shelter can protect the residual resist film out of curing during the UV exposure process, and the uncured resist can be easily removed by ultrasonic vibration in organic solutions. The CNT arrays are prepared on the patterned substrates by the pyrolysis of iron phthalocyanine (FePc). Field emission experiments reveal that the turn-on field of those CNTs arrays is low to 1.3 V/um.