Two-wavelength lidar inversion algorithm for determination of aerosol extinction-to-backscatter ratio and its application to CALIPSO lidar measurements

A modified two-wavelength lidar inversion algorithm is proposed to aid in the retrieval of aerosol extinction-to-backscatter ratios (lidar ratio) as well as backscatter coefficients and extinction color ratios from simultaneous two-wavelength elastic backscatter lidar measurements. To demonstrate the feasibility of the algorithm, both the Raman method and the two-wavelength method have been applied to the ground-based measurements at 355 and 532 nm; moreover, it has been applied to the data acquired by the Cloud Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) lidar, and to the simultaneous ground-based lidar measurements carried out at Napoli (southern Italy, 40.838 °N, 14.183 °E, 118 m above sea level). Three cases of Saharan dust transport towards Europe have been considered. From the comparison, it can be found that the values of lidar ratio and backscatter coefficient retrieved by the modified two-wavelength algorithm are in good agreement with those obtained by the Raman method. Moreover the retrieved mean values of the lidar ratios and color ratios are in agreement with those reported by other authors.

Research highlights► A modified two-wavelength lidar inversion algorithm is proposed in this paper. ► The method is applied to the CALIPSO and the Napoli lidar measurements. ► The values are compared with those obtained by the Raman methods. ► The retrieved results are also compared with those reported by other authors.