کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
543256 | 871647 | 2014 | 14 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: A process-tolerant out-of-band blocker rejection technique for SAW-less receivers A process-tolerant out-of-band blocker rejection technique for SAW-less receivers](/preview/png/543256.png)
In this paper, an active filtering technique is presented which is capable of filtering the out-of-band blockers in wireless receivers. The concept is based on the feedforward cancellation technique where a blocker replica is subtracted at the output of the low-noise amplifier (LNA). In contrast to the previously reported feedforward cancellation methods, exact gain and phase matching are easily obtained in the proposed architecture to produce a highly selective narrowband frequency response at the output of the LNA with wide rejection bandwidth. For the proof of concept, the system is implemented in a 65 nm CMOS technology. It occupies a total area of 0.8 mm2 and the current consumption is 24 mA from a 1.2 V supply. The system post-layout simulations showed a blocker rejection of more than 33 dB for blocker signals 100 MHz away from the desired signal when the feedforward path is activated. The noise figure (NF) of the entire system is 3.8 dB that degrades to 5.8 dB when the feedforward path is activated.
Journal: Microelectronics Journal - Volume 45, Issue 3, March 2014, Pages 297–310