کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5437829 | 1398178 | 2017 | 48 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Hard machining performance of PVD AlCrN coated Al2O3/TiCN ceramic inserts as a function of thin film thickness
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In the present work, AlCrN coating was deposited on Al2O3/TiCN ceramic inserts with varying thin film thickness using physical vapor deposition (PVD) technique. The thickness, surface morphology, chemical composition, hardness and adhesion strength of the coating to the substrate were characterized by field-emission scanning electron microscopy (FESEM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), micro-indentations and scratch tests respectively. The machining performance of uncoated and coated tools was investigated in hard turning of AISI 52100 steel (62 HRC) under dry environment. The cutting behavior was analyzed in terms of machining forces, tool temperature, wear, friction and chip morphology. Further, a 3D finite element model with hybrid friction criterion has been adopted to support the experimental findings. The results revealed that coating/substrate adhesion and edge radius were the deciding criteria for the machining performance of coated tools with 3 µm coating thickness tool exhibiting best turning performance on Al2O3/TiCN mixed ceramic insert.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 43, Issue 16, November 2017, Pages 13314-13329
Journal: Ceramics International - Volume 43, Issue 16, November 2017, Pages 13314-13329
نویسندگان
Ch Sateesh Kumar, Saroj Kumar Patel,