کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5438399 | 1398183 | 2017 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effects of solid lubricant and laser surface texturing on tribological behaviors of atmospheric plasma sprayed Al2O3-ZrO2 composite coatings
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Atmospheric plasma-sprayed (APS), low-friction Al2O3-ZrO2 coatings were deposited with solid lubricants, and their effects on the laser surface texturing (LST) under a lubricated condition (commercial engine oil, 5W30) were evaluated. All specimens showed a 19.6% dimple density, and the contact angle of the APS coatings after LST processing decreased by â¼19-50%. The hydrophilicity of the APS coatings improved after LST processing, and the tribological behaviors of the APS coating containing different solid lubricants were mainly observed in the abrasive grooves, spalling, microcracks, residual pores and trapped wear debris on the worn surface. The coefficient of friction for the APS coatings was affected by the solid lubricants and the LST processing. The coefficient of friction for the APS coatings (except for h-BN) when adding solid lubricants and LST processing decreased to 3.7-7.9% and 2.3-9.5%, respectively.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 43, Issue 12, 15 August 2017, Pages 9200-9206
Journal: Ceramics International - Volume 43, Issue 12, 15 August 2017, Pages 9200-9206
نویسندگان
Seung-Ho Kim, Sang-Hoon Jeong, Tae-Ho Kim, Jin-Hyuk Choi, Sung-Hun Cho, Bum Sung Kim, Soo Wohn Lee,