کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5439507 1509872 2017 22 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Method to account for the fiber orientation of the initial charge on the fiber orientation of finished part in compression molding simulation
ترجمه فارسی عنوان
روش برای حساب برای جهت گیری فیبر بار اولیه بر روی جهت گیری فیبر از بخش پایان در شبیه سازی قالب گیری فشرده
کلمات کلیدی
جهت گیری فیبر اولیه، قالب گیری فشرده، نقشه برداری،
ترجمه چکیده
در صنایع خودرو سازی، علاقه به قالب بندی فشرده سازی ترموپلاستیک تقویت شده فیبر نزولی به سرعت در حال افزایش است. قالب گیری فشرده ارائه می دهد زمان چرخه سریع، اجازه می دهد ما را به حفظ الیاف بلندتر. الیاف طولانی تر به خواص مکانیکی بهبود یافته و از این رو، قطعات سبک تر. خواص مکانیکی چنین اجزاء به طور عمده به جهت گیری فیبر بستگی دارد. مشاهده شده است که جهت گیری فیبر در بخش پایان یافته بستگی به جهت گیری فیبر اولیه بار شارژ فشرده شده دارد. در این مقاله، ما روش هایی برای اندازه گیری جهت گیری اولیه فیبر در بار شارژ ارائه می دهیم و نشان می دهیم که چگونه می توان آن را در شبیه سازی گنجانده شده است. توموگرافی کامپیوتری برای اسکن کردن بار فله برای تخمین جهت گیری الیاف در اتهام استفاده می شود. جهت برآورد شده از طریق شارژ به عنوان شرایط اولیه برای شارژ مورد استفاده در شبیه سازی قالب گیری فشرده قرار می گیرد. ما همچنین بهبود در پیش بینی جهت گیری فیبر را که از رویکرد پیشنهادی با یک مثال فیزیکی نشان می دهد، نشان می دهیم.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد سرامیک و کامپوزیت
چکیده انگلیسی
In the automotive industry, interest in compression molding of discontinuous fiber reinforced thermoplastic is rapidly increasing. Compression molding offers fast cycle times, allowing us to maintain longer fibers. Longer fibers translate into improved mechanical properties, and hence, lighter parts. The mechanical properties of such components also largely depend on the fiber orientation. It has been observed that the fiber orientation in the finished part depends on the initial fiber orientation of the bulk charge being compressed. In this paper, we present methods to measure initial fiber orientation in the bulk charge and demonstrate how it can be included in the simulation. Computer tomography is used to scan the bulk charge to estimate the orientation of the fibers in the charge. The estimated orientation through the charge is mapped as the initial condition for the charge used in the compression molding simulation. We also demonstrate the improvement in the predicted fiber orientation resulting from the proposed approach with a physical example.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part A: Applied Science and Manufacturing - Volume 100, September 2017, Pages 244-254
نویسندگان
, , , , , ,