کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5440572 | 1398232 | 2017 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Nanoindentation and tribology of VC, NbC and ZrC refractory carbides
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Deformation, damage and wear characteristics of spark plasma sintered VC, NbC and ZrC refractory carbides have been investigated using nanoindentation, tribology and micro/macro â indentation tests. Fractography, using SEM, AFM and confocal microscopy, was used for the characterization of deformation and damage mechanisms. Considerable indentation load â size effect was found in all systems with hardness values from 30 to 36Â GPa to 13-17Â GPa corresponding to the applied loads of 1 mN and 100Â N, respectively. During nanoindentation, characteristic stress-drops were observed on hardness-displacement profiles of NbC and ZrC at depth region of 15-30Â nm while this was not typical in VC. The highest coefficient of friction was measured for NbC with a value of 0.45 and the lowest for ZrC with an average value of 0.3. The wear rate of the NbC, and VC was similar, approximately 3Â ÃÂ 10â6Â mm3/Nm only the wear rate of ZrC was larger, approximately 2Â ÃÂ 10â5Â mm3/Nm.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the European Ceramic Society - Volume 37, Issue 14, November 2017, Pages 4371-4377
Journal: Journal of the European Ceramic Society - Volume 37, Issue 14, November 2017, Pages 4371-4377
نویسندگان
Ján Balko, Tamás Csanádi, Richard Sedlák, Marek Vojtko, Alexandra KovalÄÃková, Karol Koval, Piotr Wyzga, Annamária Naughton-Duszová,