کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5442591 | 1510764 | 2017 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Preparation and scintillation properties of translucent LiCaBO3:Ce polycrystalline plates
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Translucent LiCaBO3:Ce thin plates were prepared by liquid phase sintering using LiBO2 as a sintering aid, and their fluorescent and scintillation properties were investigated to examine the possibility to use as neutron scintillator. Since the initial part of the directionally solidified specimen contained a second phase of Ca3B2O6, LiCaBO3 may melt incongruently, and simple melt growth of LiCaBO3:Ce is consequently difficult. Translucent thin plates 300 μm in thickness were successfully fabricated from LiCaBO3:Ce sintered compacts. Although strong fluorescence with the peak wavelength of 390 nm was observed in photoluminescence measurement, scintillation light yield and detection efficiency by α-particle irradiation were rather poor. The diffuse reflectance spectrum of LiCaBO3:Ce revealed existence of an absorption band other than Ce3+ bands in the ultraviolet region. The band may corresponds to defect levels, which interrupt the energy transfer from the conduction band of the host to the 5d level of Ce3+ resulting in the degradation of the scintillation performance.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optical Materials - Volume 70, August 2017, Pages 180-183
Journal: Optical Materials - Volume 70, August 2017, Pages 180-183
نویسندگان
Saki Toyoda, Mikio Higuchi, Youichi Tsubota, Junichi H. Kaneko, Kiyoharu Tadanaga,