کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
54430 | 47009 | 2015 | 7 صفحه PDF | دانلود رایگان |
• Activated carbons with different amounts of surface oxygenated groups were prepared.
• The presence of acidic oxygenated surface groups is not favorable for the catalytic activity of ZVI.
• ZVI supported on AC having higher basicity yields the best phenol removal efficiency.
Activated carbons with different amounts of surface oxygenated groups were used as adsorbents or supports for zero-valent iron (ZVI) catalyst and tested in phenol adsorption and catalytic wet peroxide oxidation, respectively. The results revealed that the surface chemistry of the support plays an important role in phenol adsorption and in the catalytic performance of the respective iron-supported catalysts. ZVI is active when the support has only a limited amount of oxygenated groups on the surface. The presence of acidic oxygenated surface groups is not favorable for the catalytic activity of ZVI in phenol oxidation as well as for phenol adsorption. ZVI supported on activated carbon heat-treated at 900 °C yields the best phenol removal, reaching over 85% after 3 h, under the conditions tested: 150 mg L−1 of initial phenol concentration, initial pH set at 3, 30 °C, and the stoichiometric amount of hydrogen peroxide for achieving complete mineralization.
Figure optionsDownload high-quality image (112 K)Download as PowerPoint slide
Journal: Catalysis Today - Volume 240, Part A, 1 February 2015, Pages 73–79