Full printable perovskite solar cells based on mesoscopic TiO2/Al2O3/NiO (carbon nanotubes) architecture

- Thin nanocomposite film (∼1.8 μm) made with NiO and SWCNT is introduced for perovskite solar cells.
- A power conversion efficiency of 12.7% can be achieved for hole transport material free devices.
- The thin counter electrode shows efficient charge collection ability.

In this research work, for the first time, we introduced thin composite films (∼1.8 μm) made with NiO nanoparticles and single-walled carbon nanotubes (SWCNT) as alternatives to replace the commonly used carbon black/graphite counter electrode in full printable organic hole-transport layer free mesoporous perovskite solar cells. Due to the relative thick carbon black/graphite counter electrodes, which are typically ∼10 μm thick, charge collection and batch to batch reproducibility of this type devices are significantly limited. We find an appreciated power conversion efficiency of 12.7% can be achieved for the CH3NH3PbI3 perovskite solar cell using mesoscopic TiO2/Al2O3 framework structure in combination with a thin NiO/SWCNT counter electrode under standard reporting conditions. Electronic impedance spectroscopy measurements reveal efficient charge collection ability for perovskite devices using thin NiO/SWCNT counter electrodes compared to the conventional carbon black/graphite counter electrode, and thus can efficiently deliver photocurrent.

Thin composite films (∼1.8 μm) made with NiO nanoparticles and single-walled carbon nanotubes (SWCNT) as alternatives to the commonly used carbon black/graphite CE in HTM-free perovskite solar cells, showing an appreciated power conversion efficiency of 12.7%.70