کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5451640 | 1398549 | 2016 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Morphology and Structure of Nb Thin Films Grown by Pulsed Laser Deposition at Different Substrate Temperatures
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
شیمی مواد
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper reports the fabrication of Nb thin films through pulsed laser deposition at different substrate temperatures, ranging from 300 to 660âK. While the variation of the substrate temperature does not affect significantly the excellent Nb thin film adhesion to the Si(100) substrate surface, the increase of the substrate temperature up to 570âK promotes an improvement of the grown film in terms of morphology and roughness. Such improvement is achieved through the formation of wider columnar structures with a reduced superficial roughness, around 5ânm, as shown by scanning electron microscopy (SEM) and atomic force microscopy. The use of temperatures over 570âK increases the substrate roughness due to the formation of irregular structures inside the film, as observed by SEM cross section analysis, and does not produce a relevant improvement on the crystalline structure of the material.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Science & Technology - Volume 32, Issue 11, November 2016, Pages 1192-1196
Journal: Journal of Materials Science & Technology - Volume 32, Issue 11, November 2016, Pages 1192-1196
نویسندگان
F. Gontad, A. Lorusso, A. Manousaki, A. Klini, A. Perrone,