کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5452730 | 1513784 | 2017 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Damage micromechanisms in a hot dip galvanized steel
ترجمه فارسی عنوان
میکرومکانیسم آسیب در فولاد گالوانیزه گرم
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
گالنیزین شیب داغ، پیشگیری، خسارت،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
شیمی مواد
چکیده انگلیسی
Hot-dip galvanizing is one of the most used methods to apply zinc-based coatings on steels in order to provide sacrificial protection against corrosion over all the steel surface. The aim of this work is the analysis of the hot dip zinc coated steel plates mechanical properties by means of a non-standardized bending test performed minimizing both the bending moment differences along the bending axis and the interactions between the clamping system and the specimen coating. Bending tests are performed both on non-coated and on hot dip zinc coated plates, correlating the measured variables (applied load and crosshead displacement) with the bending moment and the specimen bending angle. Tests are characterised by a good repeatability. Results show that the main damaging mechanisms depend on the different mechanical behaviour of the intermetallic phases and on their thickness. For all the investigated coating conditions, radial cracks are observed. They initiate corresponding to the Πphase and propagate up to the ζ-η interface. The coating thickness increase implies both an increase of the importance of the cracks in δ and ζ phases and the presence of cracks at ζ-η interfaces.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia Structural Integrity - Volume 3, 2017, Pages 231-236
Journal: Procedia Structural Integrity - Volume 3, 2017, Pages 231-236
نویسندگان
Vittorio Di Cocco, Francesco Iacoviello, Laura D'Agostino, Stefano Natali,