کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5454945 | 1514364 | 2017 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Orthogonal machining introduced microstructure modification in AA7150-T651 aluminium alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In the present work, orthogonal machining is simulated on AA7150-T651 aluminium alloy by cutting using ultramicrotomy. The simulation has successfully reproduced the interaction between the tool and the workpiece during industrial machining process and the associated shear deformation introduced to the workpiece. Within the tertiary shear zone, near-surface deformed layers, characterized by ultrafine grains with diameters less than 100 nm, are generated on the workpiece. The thickness of the deformed layer ranges from approximately 200 nm to 400 nm, depending on the machining parameters. Increased cutting thickness or cutting speed results in the formation of a near-surface deformed layer with increased thickness. Machining with 0° clearance angle results in thicker deformed layer compared with that at 45° clearance angle.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Characterization - Volume 123, January 2017, Pages 91-98
Journal: Materials Characterization - Volume 123, January 2017, Pages 91-98
نویسندگان
Bing Liu, Xiaorong Zhou, Xinxin Zhang,