کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5455676 | 1514645 | 2017 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Dislocation structures in a near-isotropic Mg-Y extruded alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Deformation structures have been examined by transmission electron microscopy after 4% plastic deformation in tension and compression in a Mg-2.2 at%Y alloy extruded at 698 K to obtain a recrystallized grain size of about 20μm. The extruded alloy showed similar yield stresses of about 240 MPa in both tension and compression at room temperature. Dislocations formed by tensile stress showed a tendency of ãaã type dislocations to cross slip to prismatic planes, resulting in long continuous dislocation loops. Dislocation loops with ãcãcomponents were also observed. Occasionally, {101¯2} type twinning was also observed in grains with large orientation away from basal texture. These grains contained predominantly basal slip. Compression deformed samples showed a limited number of {101¯2} type twins. The matrix contained loops of non-basal ãaã type dislocations, together with basal dislocations with ãcã component. Inside the twins occurred stacking faults and loops of ãcã type dislocations with segments perpendicular to the basal plane. Activation of several deformation modes and complex dislocation structures explains the strain hardening behavior and low anisotropy of the alloy.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 698, 20 June 2017, Pages 238-248
Journal: Materials Science and Engineering: A - Volume 698, 20 June 2017, Pages 238-248
نویسندگان
Alok Singh, Hidetoshi Somekawa, Toshiji Mukai,