کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5456244 | 1514656 | 2017 | 27 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Mechanical properties of microconstituents in Nb-Si-Ti alloy by micropillar compression and nanoindentation
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Mechanical properties of microconstituents in Nb-Si-Ti alloy by micropillar compression and nanoindentation Mechanical properties of microconstituents in Nb-Si-Ti alloy by micropillar compression and nanoindentation](/preview/png/5456244.png)
چکیده انگلیسی
The micromechanical properties of both Nb solid solution (Nbss) and (Nb,Ti)3Si silicide in a ternary Nb-16Si-22Ti (in at%) alloy were evaluated by nanoindentation and micropillar compression techniques. Nanoindentation tests showed that (Nb,Ti)3Si possesses much higher hardness (15.6±0.6 GPa) and Young's modulus (253.3±8.4 GPa) than Nbss (5.2±0.4 GPa and 124.9±5.1 GPa, respectively). Stress-strain curves of each constituent were obtained by micropillar compression. The stress-strain behavior showed that (Nb,Ti)3Si exhibited a brittle fracture mode, while Nbss was able to bear large ductile deformation. The compressive failure strength of (Nb,Ti)3Si intermetallic and yield strength of Nbss were found to be 8.4±1.2 GPa and 0.9±0.1 GPa, respectively. The fracture toughness of the (Nb,Ti)3Si phase evaluated by cracks emanating from nanoindentation, was measured to be ~2.3 MPa-m1/2.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 687, 27 February 2017, Pages 99-106
Journal: Materials Science and Engineering: A - Volume 687, 27 February 2017, Pages 99-106
نویسندگان
Enyu Guo, Sudhanshu S. Singh, Chandrashekara S. Kaira, Xianyu Meng, Yanjin Xu, Liangshun Luo, Mingyue Wang, Nikhilesh Chawla,